Paul C. Buff Cyber ​​Commander

• Use on the camera hotshoe or handheld when the CyberSync trigger transmitter (CST2) is attached to the camera
• Up to 400' of wireless working range via radio frequency (2.4 GHz band)
• 16 frequencies to choose from16 available channels, providing complete control of up to 16 different flash units
• 8 slots available for grouping of different flash units in a setup
• Adjusts both flash power and modeling lights in 1/10 f-stop incrementsBuilt-in light meter measures individual lights, groups, or all lights together
• Stores and retrieves over 50 complex lighting setups
• Compatible with the CyberSync Plus Model Receivers (CSR+ or CSRB+) when used with AlienBees or White Lighting flash units
• Compatible with the CyberSync Transceiver (CSXCV) when used with DigiBees or Einstein flash units

IN THE BOX

• 1x Paul C. Buff Cyber ​​Commander
• 1x 2.5mm to PC cord(2)
• 1x AAA batteries
• 1x Micro SD card (inside of unit)
• 1x Neck Lanyard
• 1x Cyber Commander Product Manual
• 2-Year Factory Warranty

PRODUKTINFORMATION

The Cyber Commander™ allows for wireless triggering of flash units. Additional features include:, adjusting the outputs of both the flashbulb and modeling light directly from the camera position, grouping certain lights in a setup together, as well as naming the individual lights in the setup. Last, but certainly not least, the Cyber Commander™ even has a built in light meter!

• Artikelnummer CC
• Dimensions 2 in. (width) x 4.75 in. (height - including antenna) x 0.75 in.(depth)
• LCD Screen Dimensions 1.5 in. (width) x 2 in. (height)
• System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
• System Encoding Secure 256-bit binary encoded packet, with validity verification
• System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
• Battery Life 6.5 to 8.5 hours under normal use with premium alkaline batteries (uses two AAA alkaline or lithium batteries)
• Sync Voltage Less than 4 Vdc