Paul C. Buff CyberSync Trigger Transmitter 2

Paul C. Buff CyberSync Trigger Transmitter 2
Paul C. Buff CyberSync Trigger Transmitter 2
Paul C. Buff CyberSync Trigger Transmitter 2
Paul C. Buff CyberSync Trigger Transmitter 2
€89,95 Incl. tax
In stock
Article number:
CST2
Delivery time:
In stock / 3 working days

The CyberSync Trigger Transmitter mounts onto your camera's hot shoe to provide wireless firing. When your camera shutter is pressed Read more..

Delivery time 3 days
  • FACTORY WARRANTY

    2-Year Paul C. Buff
  • FREE RETURNS

    Within 30 days
  • DELIVERED

    UPS
  • SECURE SHOPPING

    Credit Card, Paypal, Mastercard

Information

  • Up to 350' of wireless working range via radio frequency (2.4 GHz band)
  • Enhanced spring-loaded hot shoe contact
  • Wirelessly fire an indefinite number of lights16 different frequencies to choose from
  • Runs on a replaceable CR2032 3V lithium coin cell battery
  • Reduced power draw during sleep mode for longer battery life
  • Works with all CyberSync Receivers and Transceiver (CSR, CSRB, CSR+, CSRB+ and CSXCV)***

 

IN THE BOX

  • 1x CyberSync™ Trigger Transmitter
  • 1x CR2032 Lithium coin cell battery
  • Quick Start Manual
  • 2-Year Factory Warranty

 

PRODUCT INFORMATION

***PLEASE NOTE that when using the basic CyberSync™ Trigger Transmitter 2, while the CyberSync™ Plus model receivers are compatible, they are not necessary. The CyberSync™ Plus models are only needed if you are using the Cyber Commander™, or should you anticipate purchasing the Cyber Commander™ in the future. If you DO NOT plan on using the Cyber Commander™, the regular CyberSync™ (non plus model) receivers will suffice. If using the basic CyberSync™ Trigger Transmitter with the CyberSync™ Plus Model Receivers, and no Cyber Commander™, the channel dial on the receiver is not utilized. Be sure to only use the sync cord to plug into the flash units sync jack. The telephone cable provided with the CyberSync™ Plus models, is also only necessary when using the Cyber Commander™.

The CyberSync™ Trigger Transmitter mounts onto your camera's hot shoe to provide wireless firing. When your camera shutter is pressed, the CST2 will simultaneously send the firing signal to all of the flash units in your setup that are fitted with CyberSync™ receivers or transceivers. Simply match the frequencies across all components and you’re ready to shoot!

 

Specifications

Dimensions
1 in. (width) x 3.1 in. (height) x 0.6 in.(depth)
System Frequency Range
16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding
Secure 256-bit binary encoded packet, with validity verification
System Latency
1/4000 typical delay from closing of camera contact to receiver sync output signal
Battery Life
2 years under normal use
Sync Voltage
Less than 4 Vdc

Related products

Paul C. Buff CyberSense

The CyberSense can be used to control the output of both the..
€109,95

Paul C. Buff Cyber ​​Sync Transceiver

The Transceiver is powered by the flash unit that it is conn..
€49,95

Paul C. Buff Cyber ​​Commander

The Cyber Commander allows for wireless triggering of flash ..
€229,95

Paul C. Buff Einstein Flash Unit E640

The Einstein Flash Unit features action stopping flash durat..
€699,00
Unit price: €699,00 / Piece