Paul C. Buff CyberSync Trigger Transmitter 2

Paul C. Buff CyberSync Trigger Transmitter 2
Paul C. Buff CyberSync Trigger Transmitter 2
Paul C. Buff CyberSync Trigger Transmitter 2
Paul C. Buff CyberSync Trigger Transmitter 2
€89,95 Incl. btw
Op voorraad
Artikelnummer:
CST2
EAN Code:
CST2
Levertijd:
Op voorraad / 1 - 3 werkdagen

De CyberSync Transmitter stelt u in staat om de Einstein of Digibee op afstand te triggeren. Lees meer..

Delivery time 3 days
  • FABRIEKSGARANTIE

    2 jaar fabrieksgarantie
  • GRATIS RETOUREN

    Binnen 30 dagen
  • BEZORGD

    UPS
  • VEILIG WINKELEN

    Credit Card, Paypal, Mastercard

Informatie

  • Tot 350' draadloos werkbereik via radiofrequentie (2,4 GHz-band)
  • Past op hotshoe van de camera
  • Met 16 verschillende frequenties om uit te kiezen
  • Werkt op een vervangbare CR2032 3V Lithium knoop celbatterij
  • Minder stroomverbruik tijdens de slaapmodus voor een langere levensduur van de batterij
  • Werkt met alle CyberSync-ontvangers en -zendontvanger (CSR, CSRB, CSR +, CSRB + en CSXCV) ***

 

IN DE BOX

  • 1x CyberSync Trigger Transmitter 2
  • 1x CR2032 Lithium knoop celbatterij
  • Snelle starthandleiding
  • 2 jaar fabrieksgarantie

 

PRODUCT INFORMATIE

***PLEASE NOTE that when using the basic CyberSync™ Trigger Transmitter 2, while the CyberSync™ Plus model receivers are compatible, they are not necessary. The CyberSync™ Plus models are only needed if you are using the Cyber Commander™, or should you anticipate purchasing the Cyber Commander™ in the future. If you DO NOT plan on using the Cyber Commander™, the regular CyberSync™ (non plus model) receivers will suffice. If using the basic CyberSync™ Trigger Transmitter with the CyberSync™ Plus Model Receivers, and no Cyber Commander™, the channel dial on the receiver is not utilized. Be sure to only use the sync cord to plug into the flash units sync jack. The telephone cable provided with the CyberSync™ Plus models, is also only necessary when using the Cyber Commander™.

The CyberSync™ Trigger Transmitter mounts onto your camera's hot shoe to provide wireless firing. When your camera shutter is pressed, the CST2 will simultaneously send the firing signal to all of the flash units in your setup that are fitted with CyberSync™ receivers or transceivers. Simply match the frequencies across all components and you’re ready to shoot!

Specificaties

Dimensions
1 in. (width) x 3.1 in. (height) x 0.6 in.(depth)
System Frequency Range
16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
System Encoding
Secure 256-bit binary encoded packet, with validity verification
System Latency
1/4000 typical delay from closing of camera contact to receiver sync output signal
Battery Life
2 years under normal use
Sync Voltage
Less than 4 Vdc

Gerelateerde producten

Paul C. Buff CyberSense

De CyberSense wordt gebruikt om maximaal 4 flitsers op afsta..
€109,95

Paul C. Buff Cyber ​​Sync Transceiver

De transceiver wordt gevoed door de flitser waarmee hij is v..
€49,95

Paul C. Buff Cyber ​​Commander

De Cyber ​​Commander maakt draadloze triggering van flit..
€229,95

Paul C. Buff Einstein Studioflitser E640

Einstein flitser is een zeer krachtige, volledig digitale fl..
€699,00
Stukprijs: €699,00 / Stuk