CyberSync AC Powered Receiver

Paul C. Buff CyberSync AC Powered Receiver

Zurück zur Übersicht

€ 94,95

Der CyberSync-Empfänger mit Wechselstromversorgung bietet ein einfaches und zuverlässiges drahtloses Auslösesystem und ist mit den Blitzgeräten AlienBees und White Lightning kompatibel.

Read the full product description

  • Artikelnummer: CSR

Direct checkout

  • Auf Lager
  • von 1 / 3 Werktagen


  • Inline-AC-Empfänger (Batterien sind niemals erforderlich)
  • Kompatibel mit AlienBees™ und White Lightning™ Blitzgeräten
  • Bietet die drahtlose Auslösung von Blitzgeräten, wenn der CyberSync ™ Triggersender (CST2) oder das CST nicht mehr verwendet wird
  • NICHT für die Verwendung mit DigiBee- oder Einstein ™ -Blitzgeräten


  • (1) ⅛” to ⅛” sync cord
  • (1) ⅛” to ¼” sync cord
  • (1 )⅛” to PC sync cord
  • CyberSync™ AC Powered Receiver Bedienungsanleitung
  • 2 Jahre Werksgarantie


The CyberSync™ AC Powered Receiver provides a simple and reliable wireless triggering system when utilized with the CyberSync™ Trigger Transmitter 2 (CST2), the discontinued CST, and is compatible with both the AlienBees™ and White Lightning™ flash units. The AC powered version uses a pass-through power cord to run in-line with the existing power cord that runs to your flash unit. There are no extra power cords needed and you never have to worry about changing batteries!

*For a lighting setup using multiple flashes, you will need at least one receiver. All Paul C. Buff flash units have a built-in light sensitive optical slave eye. When one receiver is connected to one flash, the others will “see” that flash begin to fire and fire in sync. Slave eyes are most reliable in controlled studio environments. If you will be working outdoors, or around other photographers, it is recommended that you have a receiver on each flash unit. This ensures that all flashes are firing via a radio frequency and you do not need to rely on the slave eye or any interference from others shooting in your vicinity.


  • Artikelnummer CSR
  • Dimensions 2.25 in. (width) x 4 in. (height) x 1 in.(depth) (plus 10 in. cord)
  • System Frequency Range 16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
  • System Encoding Secure 256-bit binary encoded packet, with validity verification
  • System Latency 1/4000 typical delay from closing of camera contact to receiver sync output signal
  • Sync Voltage Up to 300 Vdc from a connected flash unit