The CyberSync™ Transceiver is designed for use with DigiBee and Einstein™ flash units. The transceiver fits into the receptacle located on each flash unit. This forms an all-digital interface between the flash unit and the CyberSync™ Trigger Transmitter 2 (CST2), the discontinued CST, and/or the Cyber Commander™. The Transceiver is powered by the flash unit that it is connected to with the frequency and channel selection being made on the back panel of the flash unit.
|1 in. (width) x 2.75 in. (height) x 0.375 in.(depth)
|System Frequency Range
|16 frequencies spaced 2MHz apart (from 2.427GHz to 2.457GHz)
|Secure 256-bit binary encoded packet, with validity verification
|1/4000 typical delay from closing of camera contact to receiver sync output signal
|Up to 300 Vdc from a connected flash unit